Tribute DX 4WD V6-3.0L DOHC (2002)
Power Steering Line/Hose: Service and Repair
Steering Gear to Fluid Cooler Return Hose
Removal and Installation
Note:
^
Drain the excess power steering fluid into a suitable drain pan.
Note:
^
Make sure not to drop the O-ring seals.
1. Disconnect the power steering pressure and return lines.
1
Remove the bolt.
2
Disconnect the power steering pressure and return lines.
2. Remove the power steering return line bracket-to-gear bolt.
3. Release the clamp and remove the power steering return line.
Note:
^
Make sure the O-ring seals are on the power steering pressure and return lines.
4. To install, reverse the removal procedure.
1
Fill, bleed and leak check the power steering system.