Tribute DX 4WD V6-3.0L DOHC (2002)
Shifter A/T: Adjustments
SELECTOR LEVER CABLE ADJUSTMENT
1. Remove the upper steering column shroud.
2. Remove the lower steering column shroud.
1. Remove the screws.
2. Remove the lower steering column shroud.
3. Position a 0.6 mm (0.023 inch) feeler gauge between the gearshift lever selector and the gearshift lever detent.
4. Place the gearshift lever in the DRIVE position and hang a 1.4 kg (3 lb) weight from the gearshift lever.
