Tribute DX 4WD V6-3.0L DOHC (2002)
Transmission Speed Sensor: Service and Repair
Turbine Shaft Speed (TSS) Sensor
TURBINE SHAFT SPEED (TSS) SENSOR
Removal
1. Raise and support the vehicle.
2. Remove the LH front wheel.
3. Remove the splash shield.
4. Place a drain pan beneath the Turbine Shaft Speed (TSS) sensor.
5. Remove the TSS sensor.
1. Disconnect the TSS sensor electrical connector.
2. Remove the bolt.
3. Inspect the TSS sensor bore.
6. Inspect the O-ring seal for nicks or cuts. Install a new seal as necessary.
Installation