mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Customer Interest for Clutch Master Cylinder: > < Clutch Disc, M/T|Specifications|Page 3797
Page 1
background image

Clutch Master Cylinder: All Technical Service Bulletins
M/T - Clutch Master Cylinder Squeaking Noise

TSB: 05-005/06

2001 - 2004 TRIBUTE 

CLUTCH MASTER CYLINDER SQUEAKING NOISE

APPLICABLE MODEL(S)/VINS

2001 - 2004 Tribute with manual transaxle

DESCRIPTION

Some vehicles may exhibit a squeaking noise from the clutch master cylinder as the clutch pedal is depressed or released. This noise is typically only
present in ambient temperatures of 70 degrees F (21 degrees C) or higher. This condition may be caused by the design of the master cylinder seal. A
modified master cylinder is available for this concern.
Customers having this concern should have their vehicle repaired using the following repair procedure.

REPAIR PROCEDURE

1.

Verify customer concern.

2.

Replace the master cylinder according to the Workshop Manual (section 05-10 CLUTCH MASTER CYLINDER).

3.

Verify repair.

PART(S) INFORMATION

WARRANTY INFORMATION

NOTE:

^

This warranty information applies only to verified customer complaints on vehicles eligible for warranty repair. Refer to the Warranty Wizard for
warranty term information.

^

Additional diagnostic time cannot be claimed for this repair.

Disclaimer

Customer Interest for Clutch Master Cylinder: > < Clutch Disc, M/T|Specifications|Page 3797