Tribute DX 4WD V6-3.0L DOHC (2002)
Shift Cable: Adjustments
GEARSHIFT CABLE ADJUSTMENT
Note: Make sure that the gearshift lever is in neutral and the parking brake is set.
1. If necessary, remove the center console trim and gearshift lever boot.
1. Remove the gearshift lever knob.
2. Remove the center console trim and gearshift lever boot.
2. Release the gearshift cable adjuster lock.
3. Release the gearshift cable adjuster.
Note: The transaxle is in neutral when the angle between the gearshift lever and the transaxle shift lever is 90 degrees.