Tribute DX 4WD V6-3.0L DOHC (2002)
Seals and Gaskets: Service and Repair
Power Take Off Unit Inner Halfshaft Seal
POWER TAKE OFF UNIT INNER HALFSHAFT SEAL
Removal
1. Drain the Power Take Off (PTO) unit.
2. Remove the Power Take Off (PTO) unit.
3. Remove the Power Take Off (PTO) unit vent tube.
-
Remove the two bolts.
4. Remove and discard the dust shield.
Caution: The Power Take Off (PTO) unit cover is located to the case using two hollow dowels. Remove the cover squarely from the dowels to
avoid cracking the cover bosses.
5. Remove the bolts and the Power Take Off (PTO) unit cover.