mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 6444 > < Initial Inspection and Diagnostic Overview|Page 6442
Page 1
background image

Sunroof / Moonroof Panel: Adjustments

ROOF OPENING PANEL ALIGNMENT

1. Loosen the four roof opening panel bolts.
2. Close the roof opening panel.

NOTE:  The correct position of the roof opening panel to the roof panel should be 0 to 1.5 mm (0.059 in) above the roof panel at the rear edge
and -1.5 mm (-0.059 in) to 0 below the roof panel at the front edge of the panel.

3. Adjust the roof opening panel.

4. Tighten the roof opening panel bolts.

Initial Inspection and Diagnostic Overview|Page 6444 > < Initial Inspection and Diagnostic Overview|Page 6442