Tribute ES 4WD V6-3.0L DOHC (2002)
10. Install the passenger seat.
1. Install the passenger seat.
2. Install the seat track to floor bolts.
11. Position the passenger seat forward.
12. Install the seat track to floor nuts.
13. Disconnect the battery ground cable and wait at least one minute. For additional information, refer to BATTERY DISCONNECT.
Vehicles with side air bag
WARNING: The air bag diagnostic tool is for restraint system repair only. Remove from vehicle prior to road use. Failure to remove
could result in injury and possible violation of vehicle safety standards.
14. Remove the special tool from the passenger seat side air bag module body harness electrical connector.
15. Connect the passenger seat side air bag module electrical connector.
All vehicles