Tribute ES 4WD V6-3.0L DOHC (2002)
5. Remove the nuts and the brake master cylinder.
Note:
^
Whenever installing a new brake master cylinder degas bottle, install new seals. Lubricate the new seals with clean brake fluid.
6. Transfer the brake master cylinder degas bottle if a new master cylinder is to be installed.
7. To install, reverse the removal procedure.
1. Bleed the master cylinder.
2. If equipped with manual transaxle, bleed the clutch master cylinder.
Disassembly and Assembly
Disassembly
Warning:
^
Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If brake fluid
contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. It taken internally, drink water
and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.
Caution:
^
Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it with water.
1. Remove the brake master cylinder.
2. Clean the outside of the brake master cylinder.
3. Remove the brake master cylinder degas bottle.
