Tribute ES 4WD V6-3.0L DOHC (2002)
Caution:
^
Cylinder head camshaft journal caps and cylinder heads are numbered to verify shaft they are assembled in their original positions.
6. Loosen the LH camshaft cap bolts in sequence to allow the camshafts to rise from the cylinder head and remove the caps.
7. Remove the camshafts.
Installation
Note:
^
Be sure camshaft bearing caps are installed in the original positions.
1. Lubricate camshafts with SAE 5W-30 motor oil and carefully position the camshafts into the cylinder head.