Tribute ES 4WD V6-3.0L DOHC (2002)
^
Align the camshafts as shown.
Caution:
^
Do not install the camshaft journal thrust caps until all of the camshaft bearing caps have been installed, or damage to the thrust caps may
occur.
2. Lubricate the bearing surfaces of the camshaft bearing caps with SAE 5W-30 motor oil. Install the bearing caps and loosely install the bolts.
3. Lubricate the bearing surfaces of the camshaft bearing thrust caps with SAE 5W-30 motor oil. In stall the bearing thrust caps and loosely install the
bolts.