Tribute ES 4WD V6-3.0L DOHC (2002)
9. Clean the 0-ring seal grooves with a 300 mm (12 inch) length of natural fiber string.
1. Loop the string around the grooves and pull the string back and forth.
10. Remove any foreign material from the grooves with a lint-free cloth.
Connect
1. Install the A/C tube lock coupling spring.
2. Lubricate the inside of the coupling with PAG Refrigerant Compressor Oil (R-134a Systems).
CAUTION: Use only new green O-ring seals. The use of any O-ring seals other than specified may result in intermittent leakage during vehicle
operation.
NOTE: Some connections may have two or three O-ring seals.
3. Install the O-ring seals.
1. Lubricate the O-ring seals with PAG Refrigerant Compressor Oil (R-134a Systems).
