Tribute ES 4WD V6-3.0L DOHC (2002)
16.
Repeat steps 7-10 to cure product.
17.
Re-connect the A/C cycling switch connector.
AIR INLET VACUUM MOTOR BLEED VALVE TEE INSTALLATION
18.
Remove the front passenger-side air bag according to Workshop Manual (section 08-10) PASSENGER AIR BAG MODULE.
19.
Disconnect vacuum line at air inlet door vacuum motor.
20.
Install bleed valve tee (P/N EC01-61-2E0) into line 90 degree connector, and attach vacuum line with the vacuum bleed tee to air inlet door
vacuum motor according to Workshop Manual (section 07-40) VACUUM CONTROL MOTOR - OUTSIDE AIR INLET.
21.
Re-install the front passenger-side air bag according to Workshop Manual (section 08-10) PASSENGER AIR BAG MODULE.
22.
Verify repair.