Tribute ES 4WD V6-3.0L DOHC (2002)
8. Continue bleeding the rest of the system.
Front disc brakes
9. Attach a rubber drain hose to the front disc brake caliper bleeder screw and submerge the free end of the hose in a container partially filled with
clean brake fluid.
10. Have an assistant pump the brake pedal 10 times and then hold firm pressure on the brake pedal.
11. Loosen the front disc brake caliper bleeder screw until fluid flow stops. Maintain pressure on the brake pedal and tighten the front disc brake
caliper bleeder screw.
12. Repeat Steps 10 and 11 until clear, bubble-free fluid flows.
13. Tighten the front disc brake caliper bleeder screw.
14. Fill the brake master cylinder degas bottle and install the degas bottle cap.
1. Use DOT 3 brake fluid.
