Tribute ES 4WD V6-3.0L DOHC (2002)
Hose/Line HVAC: Service and Repair
Condenser to Evaporator Line
Removal and Installation
1. Remove the A/C pressure cut-off switch.
2. Remove the evaporator core orifice.
CAUTION: Plug all ports to prevent contamination from dirt or moisture.
3. Disconnect: the condenser to evaporator line from the A/C evaporator core. Refer to SPRING LOCK COUPLING.
4. Remove the evaporator line support nut and remove the line from the A/C evaporator core.
5. Remove the front bumper cover. Refer to FRONT BUMPER COVER.
CAUTION: Plug all ports to prevent contamination from dirt or moisture.
6. Remove the nut and disconnect the condenser to evaporator line from the A/C condenser core and remove the condenser to evaporator line.
7. To install, reverse the removal procedure.
-
Lubricate the O-ring seals with PAG compressor oil. Refer to REFRIGERANT OIL ADDING.
