Tribute ES 4WD V6-3.0L DOHC (2002)
bulkhead.
^
If eMDCS displays "RECALL: 1904D Closed" and a Campaign Label is present, the recall has already been completed. Return the vehicle
to inventory or the customer.
^
If eMDCS does not display "RECALL: 1904D Open" or "RECALL: 1904D Closed," this recall does not apply to the vehicle. Return
vehicle to inventory or the customer.
REPAIR PROCEDURES
Please refer to Attachment II.
Attachment II - Inspection and Repair Procedures
A. VEHICLE INSPECTION PROCEDURE
1.
Verify that the vehicle is within the following range:
^
VIN Range:
Tribute
2001-2003 Model Year (3.0L only) - 4F2****1* 1K M00137 - 4F2****1* 3K M11461
-
If the vehicle is within the above range, proceed to step 2.
-
If the vehicle is not within the above range, return the vehicle to the customer or inventory.
2.
Perform a Warranty Vehicle Inquiry using your eMDCS System and inspect vehicle for Campaign Label RECALL 1904D attached to the vehicle's
hood or bulkhead. Refer to illustration.
NOTE:
Be sure to verify RECALL number as the vehicle may have multiple RECALL labels.
-
If eMDCS displays RECALL 1904D OPEN and a Campaign Label is not present, the RECALL has not been performed. Proceed to "B. PCM
CALIBRATION LEVEL INSPECTION PROCEDURE".
-
If eMDCS displays RECALL 1904D OPEN and a Campaign Label is present, contact the Mazda Corporate Dealer Assistance Group at
(877)-727-6626. They will update the vehicle history.
-
If eMDCS displays RECALL 1904D CLOSED and a Campaign Label is not present, proceed to "D. CAMPAIGN LABEL
INSTALLATION".
-
If eMDCS displays RECALL 1904D CLOSED and a Campaign Label is present, the RECALL has already been completed. Return the vehicle
to inventory or the customer.
-
If eMDCS does not display RECALL 1904D OPEN or RECALL 1904D CLOSED, this RECALL does not apply to the vehicle. Return
vehicle to inventory or the customer.
B. PCM CALIBRATION LEVEL INSPECTION PROCEDURE
1.
Using WDS B30.7 or later software, proceed to "Module Reprogramming" to check PCM calibration level.
