Tribute ES 4WD V6-3.0L DOHC (2002)
10. Install the lower steering column shroud.
1. Release the tilt column locking lever, equipped.
NOTE: The steering column must be in the raised position, with the tilt column lever released (if equipped), to install the lower steering
column shroud.
2. Position the lower steering column shroud to the steering column.
3. Install the three screws.
Vehicles with tilt column
11. Position the steering column completely downward.
All vehicles
12. Position the upper steering column shroud to the steering column and completely engage the retaining tabs.
1. Make sure the upper steering column shroud is aligned correctly and the retaining tabs are completely engaged.
NOTE: Make sure to follow all steps and instructions in the installation of the steering wheel.
13. Install the steering wheel. For additional information, refer to STEERING WHEEL.
WARNING: The air bag diagnostic tool is for restraint system repair only. Remove from vehicle prior to road use. Failure to remove
could result in injury and possible violation of vehicle safety standards.
14. With all the restraint system diagnostic tools removed, prove out the air bag system. For additional information, refer to DIAGNOSTIC
INSTRUCTIONS AIR BAG AND SAFETY BELT PRETENSIONER SUPPLEMENTAL RESTRAINT SYSTEM (SRS).
