Tribute ES 4WD V6-3.0L DOHC (2002)
10. Install the C-pillar weatherstripping.
11. Install the rear door scuff plate.
1. Position the rear door scuff plate.
2. Install the two pin-type retainers (one shown).
3. Close the cover.
12. Check the active restraint system for correct operation.
1. Make sure that after the rear safety belt retractor is installed, the retractor is not in the Automatic Locking Retractor (ALR) mode.
2. Carry out the Emergency Locking Retractor (ELR) Mode Functional Test to make sure that the new retractor operates correctly. For additional
information, refer to Component Test in the Diagnosis and Testing portion of this section.
