Tribute ES 4WD V6-3.0L DOHC (2002)
3. Move the top of the tire inboard or outboard to adjust camber (Figure 4).
- If more negative camber is desired, push the top of the tire inboard.
- If less negative camber is desired, pull the top of the tire outboard.
4. With the tire at the desired position, torque the new fasteners to 85 lb-ft (115 Nm).
5. Lower the vehicle back down.
6. Place vehicle on alignment rack and measure the alignment to confirm the desired camber change was achieved.
NOTE: Do not adjust the alignment settings (individual camber) beyond the released specifications.
PART(S) INFORMATION
Technical Service Bulletin # 0200510
Date: 100326
Steering - Steering Wheel Is Off Center
Bulletin No: 02-005/10
Last Issued: 03/26/2010
Subject:
STEERING WHEEL OFF CENTER
APPLICABLE MODEL(S)/VINS
2001-2010 Tribute
2003-2010 Mazda6
2004-2010 Mazda3
2006-2010 Mazda5
2006-2010 Mazda MX-5
2007-2010 Mazda CX-7
2007-2010 Mazda CX-9
2004-2010 Mazda RX-8
DESCRIPTION