Tribute ES 4WD V6-3.0L DOHC (2002)
5. Using the special tool, separate the halfshaft from the front wheel knuckle.
6. Remove the halfshaft.
Installation
Note: When seated correctly, the driveshaft bearing retainer circlip can be felt as it snaps into the differential side gear groove.
1. Position the front wheel driveshaft and joint so the splines line up with the differential side gear splines. Push the front wheel driveshaft and joint
into the differential side gear.
2. Using the special tool, position the halfshaft into the front wheel knuckle.