Tribute ES 4WD V6-3.0L DOHC (2002)
Power Take-Off: Service and Repair
Removal and Installation
POWER TAKE OFF UNIT-3.0L DURATEC (4V)
Removal
1. Disconnect the battery ground cable.
2. Remove the driveshaft.
3. Remove the four bolts and the crossmember brace.
4. Remove the generator.
5. Disconnect the RH catalyst monitor.
6. Remove and discard the two nuts and separate the flexible Y-pipe from the manifold.
7. Remove and discard the nuts.
-
Discard the gasket.