Tribute ES 4WD V6-3.0L DOHC (2002)
Output Yoke/Flange: Service and Repair
Power Take Off Unit Rear Output Shaft Flange Dust Shield
POWER TAKE OFF UNIT REAR OUTPUT SHAFT FLANGE DUST SHIELD
Removal
1. Remove the companion flange.
2. Remove the companion flange dust shield.
Installation
1. Using the special tool, install the companion flange dust shield.
2. Install the companion flange.
Note: Refill capacities are determined by filling the Power Take Off (PTO) unit to the bottom of the filler hole.
3. Check the Power Take Off (PTO) unit oil level.
