Tribute ES 4WD V6-3.0L DOHC (2002)
12. Install the windshield glass aligning it to the marks previously made.
13. After the windshield glass is set, check for water leaks and add urethane adhesive where needed.
14. If necessary, remove excess urethane adhesive from the outside surface of the windshield glass.
15. Install the cowl grille. Refer to COWL PANEL GRILLE.
16. Reposition the front portion of the headliner.
17. Install the overhead console.
1. Position the overhead console.
-
If equipped , connect the electrical connector.
2. Install the screws.
18. Install the overhead driver and passenger assist handles.
19. Install the two sun visors and two clips.
1. Position the sun visors and clips.
2. Install the six screws.
20. Install the interior rear view mirror.