Tribute ES 4WD V6-3.0L DOHC (2002)
Windshield Washer Switch: Service and Repair
Combination Switch
STEERING COLUMN MULTIFUNCTION SWITCH
Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the upper steering column shroud.
3. Remove the lower steering column shroud.
1. Remove the screws.
2. Remove the lower steering column shroud.
4. Remove the multifunction switch.
1. Disconnect the electrical connector.
2. Remove the screws.
3. Remove the multifunction switch.
5. To install, reverse the removal procedure.