Tribute LX 2WD V6-3.0L DOHC (2001)
eMDCS System - Warranty Vehicle Inquiry Results as shown.
ABS MODULE CONNECTOR INSPECTION AND REPAIR OVERVIEW
This program includes making sure the wiring harness connector is properly sealed against moisture/contamination, and inspecting the ABS
module for evidence of corrosion resulting from an inadequately sealed connector.
During the inspection, we expect that most of the affected vehicles will not have any evidence of corrosion in the ABS module. However, the ABS
wiring harness connector still needs to be inspected for missing or improperly seated seals and/or incorrect connector number.
If the ABS module is corroded, the ABS module and connector must be replaced.
A flow chart has been developed to help direct you to the proper repair.
B.
INSPECTION
1.
Record customer's pre-set radio stations.
2.
Disconnect negative battery cable.
3.
Locate ABS module connector under brake master cylinder.
