Tribute LX 2WD V6-3.0L DOHC (2001)
13. Tighten the front disc brake caliper bleeder screw.
14. Fill the brake master cylinder reservoir and install the reservoir cap.
1. Use DOT 3 brake fluid.
Gravity Bleed
Gravity Bleed
Brake system
Caution:
^
Be sure to check the brake fluid level in the brake master cylinder reservoir often. Do not let it run dry.
1. Fill the brake master cylinder reservoir with DOT 3 brake fluid.
2. Begin bleeding the system, going in order from the RH rear wheel, to the LH rear wheel, then to the RH front wheel and ending with the LH front
wheel.
Rear drum brakes
Caution:
^
Be sure to check the brake fluid level in the brake master cylinder reservoir often. Do not let it run dry.
3. Loosen the rear wheel cylinder bleeder screw and leave open until clear, bubble-free brake fluid flows.
