Tribute LX 2WD V6-3.0L DOHC (2001)
3. Attach a rubber drain hose to the rear bleeder screw and submerge the free end of the hose in a container partially filled with clean brake fluid.
4. Have an assistant pump the brake pedal 10 times and then hold firm pressure on the brake pedal.
5. Loosen the bleeder screw until fluid flow stops. Maintain pressure on the brake pedal and tighten the bleeder screw.
6. Repeat Steps 4 and 5 until clear, bubble-free brake fluid flows.
7. Tighten the wheel cylinder bleeder screw.
8. Continue bleeding the rest of the system.
Front disc brakes
9. Attach a rubber drain hose to the front disc brake caliper bleeder screw and submerge the free end of the hose in a container partially filled with
clean brake fluid.
10. Have an assistant pump the brake pedal 10 times and then hold firm pressure on the brake pedal.
11. Loosen the front disc brake caliper bleeder screw until fluid flow stops. Maintain pressure on the brake pedal and tighten the front disc brake
caliper bleeder screw.
12. Repeat Steps 10 and 11 until clear, bubble-free fluid flows.
