mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Brake Fluid Reservoir|Page 4265 > < Brakes - Brake Fluid Reservoir Cap Leakage|Page 4262
Page 1
background image

Brake Master Cylinder: Service and Repair
Brake Fluid Reservoir

Removal 

Warning:  Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If brake
fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink water
and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.
 

Caution:  Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it with
water.

1. Disconnect the fluid level electrical connector.
2. Using a suitable suction device, drain the brake master cylinder degas bottle.

3. If equipped with manual transaxle, disconnect the clutch master cylinder feed.

4. Remove the brake master cylinder degas bottle.

Installation 

Note:  Whenever installing a new brake master cylinder degas bottle, install new seals.

Brake Fluid Reservoir|Page 4265 > < Brakes - Brake Fluid Reservoir Cap Leakage|Page 4262