Tribute LX 2WD V6-3.0L DOHC (2001)
Cruise Control Switch: Service and Repair
Speed Control Deactivator Switch
Removal
1. Remove the deactivator switch.
1. Disconnect the electrical connector.
2. Rotate counterclockwise 45 degrees and remove the deactivator switch.
Installation
CAUTION: Initial installation of a deactivator switch allows for one adjustment. If additional adjustments are required, install a new switch.
1. Release the plunger lock.
1. Turn the lock knob counterclockwise until the first click is felt.
2. Depress the brake pedal.
3. Install the deactivator switch.
1. Position the deactivator switch in the bracket and rotate clockwise 45 degrees.
2. Connect the electrical connector.
NOTE: There should be an extra click heard when tugging on the brake pedal.
4. Slowly release the brake pedal and tug moderately once the pedal reaches the rest position.