Tribute LX 2WD V6-3.0L DOHC (2001)
3. Apply a 6 mm (0.24 inch) diameter dot of silicone gasket and sealer to the cylinder block, lower cylinder block, and cylinder head mating
surfaces.
Note: Fasteners No. 1, 3, 4, 8, 10, 11, 14, 15 and 16 are studs.
4. Position the cover and install the studs and bolts in the sequence shown.
5. Install the CKP sensor and connect the electrical connector.
6. Install the crankshaft pulley.
