Tribute LX 2WD V6-3.0L DOHC (2001)
3. Move the top of the tire inboard or outboard to adjust camber (Figure 4).
- If more negative camber is desired, push the top of the tire inboard.
- If less negative camber is desired, pull the top of the tire outboard.
4. With the tire at the desired position, torque the new fasteners to 85 lb-ft (115 Nm).
5. Lower the vehicle back down.
6. Place vehicle on alignment rack and measure the alignment to confirm the desired camber change was achieved.
NOTE: Do not adjust the alignment settings (individual camber) beyond the released specifications.
PART(S) INFORMATION
Technical Service Bulletin # 0200105
Date: 060720
Steering/Suspension - Vehicle Pulls To One Side
TSB: 02-001/05
2001-2005 TRIBUTE - STEERING DRIFT / PULL - IMPROVED DIAGNOSTIC AND REPAIR PROCEDURE
APPLICABLE MODEL(S)/VINS
2001-2005 Tribute
DESCRIPTION
Some vehicles may exhibit a drift/pull to either the right or left. This condition may occur even if the alignment settings are within specifications.
The following procedure is designed to supplement the Workshop Manual. It contains a more detailed description of the camber/caster adjustment,
updated diagnostics to help determine cause and an updated camber adjustment procedure.
REPAIR PROCEDURE
