Tribute LX 2WD V6-3.0L DOHC (2001)
Power Steering Line/Hose: Service and Repair
Steering Gear to Fluid Cooler Return Hose
Removal and Installation
Note:
-
Drain the excess power steering fluid into a suitable drain pan.
Note:
-
Make sure not to drop the O-ring seals.
1. Disconnect the power steering pressure and return lines.
1. Remove the bolt.
2. Disconnect the power steering pressure and return lines.
2. Remove the power steering return line bracket-to gear bolt.
3. Release the clamp and remove the power steering return line.
Note:
-
Make sure the O-ring seals are on the power steering pressure and return lines.
4. To install, reverse the removal procedure.
1. Fill, bleed and leak check the power steering system.