Tribute LX 2WD V6-3.0L DOHC (2001)
2.
Remove the fuel pump sending unit from the fuel tank. Refer to Workshop Manual (section F or 01) for removal procedure.
3.
Remove the black (negative) and red (positive) connectors from the fuel pump.
4.
Cut the black and red wires to the fuel pump 3 inches (76 mm) below the flange of the fuel pump.
5.
Solder both the red and black wires of the RFI Filter to the red and black wires below the flange. Use heat shrink tubing over the solder
connectors.
NOTE:
