Tribute LX 2WD V6-3.0L DOHC (2001)
Fuel Line Coupler: Service and Repair
Quick Release Coupling
Push Connect
Disconnect
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related component. Highly
flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in personal injury.
WARNING: Fuel in the fuel system remains under high pressure even when the engine is not running. Before repairing or disconnecting any
of the fuel lines or fuel system components, the fuel pressure must be relieved to prevent accidental spraying of fuel, causing personal injury or
a fire hazard. Failure to follow these instructions may result in personal injury.
1. Perform the Fuel Pressure Release procedure..
2. Disconnect the battery ground cable.
3. Separate the coupling.
1. Depress the tabs.
2. Separate the coupling.
Connect
1. Clean and inspect the coupling and the tube for damage.
2. Align the tube to the coupling and push until you hear a click.
3. Pull on the coupling to make sure it is fully engaged.
4. Connect the battery ground cable.
R-Clip
Disconnect
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related component. Highly
flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in personal injury.
WARNING: Fuel in the fuel system remains under high pressure even when the engine is not running. Before repairing or disconnecting any
of the fuel lines or fuel system components, the fuel pressure must be relieved to prevent accidental spraying of fuel, causing personal injury or
a fire hazard. Failure to follow these instructions may result in personal injury.
