Tribute LX 2WD V6-3.0L DOHC (2001)
Fuel Pressure Test Port: Service and Repair
FUEL PRESSURE RELIEF VALVE
Removal and Installation
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly
flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in personal injury.
WARNING: Fuel in the fuel system remains under high pressure even when the engine is not running. Before working on or disconnecting any
of the fuel lines or fuel system components, the fuel system pressure must be relieved. Failure to follow these instructions may result in personal
injury.
1. Perform the Fuel Pressure Release procedure..
2. Remove the pressure relief valve.
3. To install, reverse the removal procedure.
