mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Recalls for Electronic Brake Control Module: > < Recall - ABS Module Connector Defect|Page 90
Page 1
background image

Electronic Brake Control Module: All Technical Service Bulletins
Recall 07V157000: ABS Module Connector Defect

MAKE/MODELS:           MODEL/BUILD YEARS:      
     
Mazda/Tribute             2001-2004
 
MANUFACTURER: Mazda Motor Corp.   
 
NHTSA CAMPAIGN ID NUMBER: 07V157000  MFR'S REPORT DATE: March 30, 2007 

COMPONENT: Service Brakes, Hydraulic: Antilock: Control Unit/Module  

POTENTIAL NUMBER OF UNITS AFFECTED: 95300 

SUMMARY: 
 On certain sport utility vehicles equipped with ANTILOCK Brakes (ABS), the ABS module connector may have missing or dislodged wire seals. this
condition could allow contamination to enter the module connector, creating a potential for an electrical short.  

CONSEQUENCE: 
 An electrical short might cause an ABS malfunction that would illuminate the ABS warning light, and in some cases, the module may overheat resulting
in burning odor, smoke, and/or fire. This condition could occur either when the vehicle ignition switch is in the off position or while the vehicle is being
operated.  

REMEDY: 
 Dealers will inspect the wire harness connector to the ABS module for missing or dislodged wire seals, and repair or replace the harness connector as
appropriate. The dealer will also inspect the connector on the ABS module and replace it if it is found to be corroded or damaged. The recall began on
April 30, 2007. Owners may contact Mazda at 1-800-222-5500. 

NOTES: 
 Mazda recall No. 4507C. Customers may also contact The National Highway Traffic Safety Administration's Vehicle Safety Hotline at 1-888-327-4236
(TTY 1-800-424-9153), or go to http://www.safercar.gov.

Recalls for Electronic Brake Control Module: > < Recall - ABS Module Connector Defect|Page 90