mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Restraint Control Module|Page 247 > < Restraint Control Module|Page 245
Page 6
background image

13. Remove the air bag from the passenger seat safety belt buckle pretensioner floor electrical connector.
14. Connect the passenger seat safety belt buckle pretensioner electrical connector.

Vehicles with side air bags

WARNING:  The air bag is for restraint system service only. Remove from vehicle prior to road use. Failure to remove could result in
injury and possible violation of vehicle safety standards.

15. Remove the air bag from the passenger seat side air bag floor electrical connector.
16. Connect the passenger seat side air bag electrical connector.

All vehicles

WARNING:  The air bag is for restraint system service only. Remove from vehicle prior to road use. Failure to remove could result in
injury and possible violation of vehicle safety standards.

17. Remove the air bag from the vehicle harness side of the passenger air bag electrical connector.
18. Connect the passenger air bag electrical connector.
19. Close the glove box.

WARNING:  The air bag is for restraint system service only. Remove from vehicle prior to road use. Failure to remove could result in
injury and possible violation of vehicle safety standards.

20. Remove the air bag from the air bag sliding contact electrical connector at the top of the steering column.

21. Connect the driver air bag electrical connector. 

1. Connect the driver air bag electrical connector 
2. Install the driver air bag electrical connector P type retainer into the steering wheel bracket.

Restraint Control Module|Page 247 > < Restraint Control Module|Page 245