Tribute LX 2WD V6-3.0L DOHC (2001)
supplemental restraint system (SRS) components.
6.
Follow the instructions included with the SAB Terminal Repair Kit.
CAUTION:
Carefully refer to the "Service Point for Wire Soldering" and DO NOT allow bad soldering.
7.
Turn the ignition switch from OFF to ON.
8.
Install the RCM fuses # ) 5 (5A) and # ) 7 (10A) to the CIB and install the cover.
WARNING:
Be sure that there are no occupants in the vehicle and that there are no objects blocking or sitting in front of any air bag module when the
battery negative cable is re-connected. Failure to follow this procedure can result in injury or death.
9.
Reconnect the negative battery cable.
10.
If any further problems are noted, perform additional diagnosis after first repeating the power depletion process addressed in Steps 3 - 5 above.
11.
Re-program the recorded preset radio stations.
12.
Clear and reset all codes and confirm the repair.
13.
Road test the vehicle to relearn KAM (Keep Alive Memory) strategy and verify no DTCs are present.
PART(S) INFORMATION
