Tribute LX 2WD V6-3.0L DOHC (2001)
22. Connect the transaxle harness connector, and the TR sensor connector.
23. Install the intake tube and air cleaner cover.
24. Connect the breather tube and mass air flow (MAF) intake air temperature (IAT) sensor.
Note: Before installing the battery tray check the vent tube hose for any obstructions, kinks, or incorrect routing position.
25. Install the battery tray and battery.
26. Connect the battery cables.
27. Check the transaxle fluid, add fluid as necessary using MERCON (R) Automatic Transaxle Fluid (ATF).
28. Start the engine and move the transaxle range selector lever through all gear positions. Refill as necessary.
