190E 2.3 (201.024) L4-2.3L (102.961) (1984)
Figure 3 - Hydraulic Motor Mounts, Front
The modified hydraliuc front motor mounts can be identified by the cover (a), the missing rubber coating on the skirt (b), and the narrower rubber
section (c) (Figure 3).
Hydraulic motor mounts, front A - Previous version B - Modified version
Complaints, such as:
-
occasionally one or two loud knocks are heard immediately after starting engine, - engine shakes, - belt chatters and squeals with transmission in
gear and steering wheel held against stop, - belt chatters and squeals when slowly beginning to drive forward or backward, can be serviced by
performing the work outlined in the attached Work Instruction No. 174a.
Figure 4 - Shock Absorber for Belt Tensioner
Figure 5 - Arrangement of Modified Shock Absorber for the 102 Engine