190E 2.3 (201.024) L4-2.3L (102.961) (1984)
/l4-2.3l_(102.961)/Page-694001.png)
Timing Cover: Service and Repair
REMOVAL
-
Lift hood to a 90° angle and engage left hand locking lever.
-
Disconnect battery ground cable.
-
Drain cooling system and engine oil.
-
Remove air cleaner assembly.
-
Disconnect accelerator linkage.
-
Remove radiator. See: Cooling System/Radiator
-
Remove the drive belt. See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt
-
Remove the drive belt tensioner. See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt Tensioner
-
Remove the water pump. See: Water Pump
-
Remove vibration damper. See: Cylinder Block Assembly/Harmonic Balancer - Crankshaft Pulley
-
Remove ignition distributor.
-
Remove oil pan. See: Engine Lubrication/Oil Pan/Service and Repair
-
On models equipped with self leveling suspension, unbolt pressure oil pump, place to the side with lines connected (arrows).
-
Remove cylinder head cover. See: Cylinder Head Assembly/Valve Cover
-
Remove hexagon socket bolts (arrows) in the chain box with a stud wrench.
^
Tightening torque 25 Nm (18.5 ft lbs) (reference value).
