190E 2.3 (201.024) L4-2.3L (102.961) (1984)
Socket 14 mm, 3/8" square
e.g. Hazet, D-5630 Remscheid
Slip gauge (set)
e.g. Hazet, D-5630 Remscheid Part no.2147
Long-nose pliers 72 A (inside lock)
e.g. Hazet D-5630 Remscheid Part no. 1846a-1
Pliers for locking ring J 2 (outside lock)
e.g. Hazet D-5630 Remscheid Part no. 1846c-2
Double open-end wrench 1/2" x 9/6", 5/8" x 3/4",
7/8"x15/16", 1"x11/8"
Self-made tool
Tool for removing O-ring
a) Shaft seal of refrigerant compressor
Removing
1
Drain air conditioning system (recycling).
2
Remove refrigerant compressor
3
Remove spring plate
4
Remove locking ring (10) for shaft seal.
5
Remove slip ring (12) using removal and installation tool 000 589 65 03 00.