mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Idle Speed - Installing Harness and Resistor|Page 1091 > < Idle Speed - Installing Harness and Resistor|Page 1089
Page 6
background image

^  As of 09/89 and model year 1990: idle speed control with heating speed. This is activated for not more than 28 seconds after each start

(conditions: closed throttle position contact closed and selector lever in position "P" or "N").

Test conditions 

^  Engine coolant temperature sensor, decel fuel shutoff microswitch and idle speed detection throttle valve switch (RUF/KAT) in order.
^  Intake system not leaking.
^  Engine oil temperature approx. 80°C.

Test Steps 1.0 - 1.4

Idle Speed - Installing Harness and Resistor|Page 1091 > < Idle Speed - Installing Harness and Resistor|Page 1089