190E 2.3 (201.024) L4-2.3L (102.961) (1984)
Shifter A/T: Service and Repair
Disassembling and Assembling Floor Shift Mechanism
Disassembling and Assembling Floor Shift Mechanism
Models 201, 202,210
Cover (3)
Unclip. clip in.
Shift lever (2)
Remove, install by loosening locknut (12) (up to May '89).
Installation Note
Ensure correct installation position (arrow).
Selector lever handle
Remove, install, loosen clamp in clockwise direction (as of 06/94)
Installation Note
Ensure correct installed position.
Slide (27), cover (9), fibre-optics (7a), cover strip (8), bracket (26), cup seal (25) and any sliding switch for "S" and "E" - program (28)
Remove in sequence and assemble
Fork head (13) with double shank spring (14)
Remove, install by pressing off locking device (16), remove bearing pin (17) and remove plastic bushes (15).
Gasket (22)
Remove, and push in.
Locking device (53)
Press off, press on.
Locator panel (51)