mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Radio - Modified Anti-Theft Protection|Page 9312 > < Radio - Modified Anti-Theft Protection|Page 9310
Page 3
background image

4.

Version 4 utilizes a positivelock spade connection riveted on the lower center of the rear cover (Figure 4). This version has been phased into
production as of January 1987 and is the current version.

A.Modified Anti-Theft Alarm Connection At Radio

1.

Models 107, 124.193 and 201

As of August 1986 production, a positive-lock spade connection on the lower left rear of the radio chassis is installed (version 2).

Effective Serial Number

Model

As of Chassis End Number

107.048

1A 055174

124.193

1F 019828

201

1F 269878

FIGURE 6

Model 107 vehicles prior to the production change must be updated to version 3 during their next scheduled maintenance or repair by removing the
spring contact and bracket installing a harness with positivelock coupling and spring tab (1 and 2, Figure 6) (refer to modification procedure).

Model 124.193 and 201 vehicles prior to the production change should be updated to version 3 only when replacing a defective radio chassis (refer to
modification procedure).
2.

Models 124 and 126

Models 124 and 126 were produced with the first version radios until December 1986.

As of the following chassis numbers version 3 is installed:

Effective Serial Number

Model

As of chassis

Number

124

1A 3962

126

1A 309780

Radio - Modified Anti-Theft Protection|Page 9312 > < Radio - Modified Anti-Theft Protection|Page 9310