190E 2.3 (201.028) L4-2.3L (102.985) (1987)
/l4-2.3l_(102.985)/Page-2507003.png)
8. Remove window opener from inside door panel and swivel backwards, while sliding guide member from window opener rail outwards.
9. Pull electrical connecting cable from window opener motor out of holder on inner door panel.
10. Remove window opener with motor by taking it out through assembly opening in downward direction.
Installation
WARNING: The electric-cable rear window opener may only be actuated in installed condition, since only in connection with the inner door panel, it
will have its required functional stiffness (danger of damage).
11. Introduce window opener with guide member into window opener rail and install locking clamp.
