190E 2.3 (201.028) L4-2.3L (102.985) (1987)
/l4-2.3l_(102.985)/Page-2611002.png)
purpose unscrew cable in the transport bridge and push pop-up sliding roof cover by hand.
Height Adjustment, Front:
4 Open pop-up sliding roof and loosen fastening screws on slide rails.
5 Adjust height adjusting screw at left and right in such a manner that the front edge of the closed pop-up sliding roof is approx. 0 to 1 mm deeper than
the outer skin of roof.
6 Tighten fastening screws of slide rails.
