190E 2.3 (201.028) L4-2.3L (102.985) (1987)
/l4-2.3l_(102.985)/Page-918002.png)
1. Remove and install V-belt
2. Unscrew belt pulley for coolant pump
Tightening torques:
Hex. socket bolts 10 Nm
Hex. Torx© bolts 15 Nm
3. Detach cable connector (68a) from solenoid body.
4. Unscrew solenoid body (68), screw on, pay attention to installed position
Tightening torque 10 Nm (reference value).
Note: The carrier for the solenoid body is bonded to the coolant pump housing. Attach loose carrier with adhesive 001 989 47 20.
