190E 2.3 (201.028) L4-2.3L (102.985) (1987)
-
Check carbon brushes (32d) and brass contact rings. If there are grinding noises from the carbon brushes (32d), coat brass contact rings lightly
with 331 contact grease or Elektrolube 2 GX.
On a test trip, check the following:
-
Position of steering wheel. If the steering wheel is not on square, offset it by max. 1 tooth. If there is a greater deviation, check center position
of steering gear, adjust toe-in if necessary.
-
Turn signal indicator resetting. If the steering wheel is offset by more than 1 tooth, satisfactory turn signal indicator resetting is no longer
guaranteed.
Notes on cleaning steering wheels:
-
Dirty or sticky steering wheels can be cleaned with a neutral household detergent, the steering wheel being washed with a lukewarm solution of
detergent. Scouring agents must not be used.