190E 2.3 (201.028) L4-2.3L (102.985) (1987)
/l4-2.3l_(102.985)/Page-2056005.png)
16. Install rear axle switches for rollover bar (S83/2 and S83/3). Replace self-locking hex. nut.
All models
17. Lower vehicle.
18. Assemble top mount ensuring that round side of bottom rubber mount (75d) points toward frame floor. Tighten bottom hex. nuts to 15-18 Nm then
counter with top nut. Tightening torque 30 Nm.
Ensure that mbber mount (75c) and washer (75b) are seated properly.
19. Install trunk paneling (on model 124.06, oonvertible, paneling in soft top box).
